Artificial Turf Installation

By |

Artificial Turf Installation

Artificial Turf Installation; Synthetic Grass Melbourne

Choosing the ideal grass can be challenging, and with so many options available, manufacturers try to figure out just how you want your artificial grass to improve the value of your house. You must first get synthetic grass if you are eager to install artificial grass. The team of experts will assist you in selecting the synthetic grass that is best for your home and yourself.

Artificial turf has made its way into residential gardens as a visually pleasing, low-maintenance substitute for real grass. Artificial turf installation could be the answer you’ve been seeking for, whether you’re sick of watering, fertilizing, and mowing your lawn and want to turn your backyard into a useful and beautiful area.

Advantages of installing Artificial Grass

While artificial grass is often dismissed as a poor alternative to natural grass, the truth is, that it has many benefits:

  • Perfect for any climate or season
  • Free from toxic materials
  • Child and Pet friendly
  • UV-Protected (won’t fade)
  • Incredibly soft to touch and walk upon

Synthetic Grass Melbourne

Can I install artificial turf on my own?

You have the choice to install artificial turf yourself or by hiring a professional if you decide to purchase artificial turf. Artificial lawns can be more reasonably priced if you install the turf yourself, but there’s a chance you won’t do it right and you might lose your investment.

Which Australian artificial grass base is the best?

It is advised that you lay down the artificial turf on a foundation of compacted crusher dust. Installing on a concrete slab is the ideal situation, although it’s not necessary. A minimum of 50mm of crusher dust (after compaction) is advised, depending on your current sub foundation.

What is the durability of artificial turf?

You should anticipate that an artificial grass lawn will last at least 8 to 10 years, while estimates of longevity vary due to a variety of reasons. Your ever-green yard should easily last 15 to 20 years with high-quality turf and a little routine maintenance (raking and cleaning).

Artificial Turf Installation Guide

  • Take Out the Grass

Take out the top four inches of your current base and lawn, then dispose of it by local laws. They advise bringing a dump trailer to the location because dirt accumulates quickly.

  • Include Base

Next, cover the area where you will be laying your grass with an even layer of three inches of class two road base. A flat platform with appropriate drainage can be created with the use of a road base. To prepare the ground for the material to be laid, lightly moisten it and then run a compactor over it. To stop weeds and pests from growing through your newly planted lawn, you might want to add gopher wire and weed barrier, depending on the size of your yard. If you have pets, it is NOT advised to use weed barriers.

  • Install turf

Take care not to allow your magnificent new grass slide across your just-prepared base when you roll it out. For the grass to swell, they advise leaving it in the sun for 30 to 60 minutes. Verify that the stitch patterns and blades are facing the same direction. A bad-looking lawn would arise from ignoring this. The turf can be stretched and moved into position using a carpet kicker.

  • Trim to Fit

Next, trim your new lawn to match the irregular shape of your yard with a box cutter. To assist with finishing touches, leave a quarter to half an inch of turf over the border. Next, use glue and seam tape to seal the seams. To create a spotless, organic-looking yard, the seams must be properly fitted together. Ensure that the spacing between stitch rows matches and that each piece of turf has blades orientated in the same direction. Position the seam tape’s red line exactly in the middle of the seam. Next, use the glue on both sides of the red line to form a “S” pattern. After positioning the turf, let the glue to solidify.

  • Keep the Periphery Safe

Once the border has been tucked in with a putty knife and hammer, fasten your turf to its three-inch base by inserting 40-D 5-inch non-galvanized turf nails every six inches. It is also advised to reinforce these locations by putting a few nails along the seams. Prior to applying infill, use a power or push broom to brush the turf to straighten the blades. A more perpendicular blade memory will result from this.

  • Disperse the Infill

The filler needs to be spread next! The look, feel, and longevity of your lawn will all be directly impacted by the proper amount of infill added. To evenly distribute the recommended amount of infill, use a drop spreader.

  •  Infill Brush

After the infill is installed, brush the turf using a push or power broom. This will make the blades stand straight and give the impression that the grass has just been mowed on your new lawn. Finally, give the grass a final rinse to remove any last bits of dust.

  • Have Fun on Your Lawn!

After giving your lawn a thorough washing and packing away your tools, all you need to do is sit back, unwind, and relish your freshly installed turf! You won’t ever again have to bother about rising early to mow. Brushing your lawn a few times a year is the only care required.

For Melbourne-wide Synthetic Turf Installation, contact Grass 1. They offer installation and maintenance services for lawns around Melbourne. They also take great delight in giving Melbourne locals expert guidance on how to lay turf yourself and pointers on how to maximize their landscaping designs. For more details, click here.


Leave a Reply

Your email address will not be published. Required fields are marked *